DIN EN853 2SN vs DIN EN857 2SC Hydraulic Hose

18, Nov. 2026

 

DIN EN 853 2SN vs DIN EN 857 2SC Hydraulic Hose: Key Differences

Short answer: DIN EN 853 2SN and DIN EN 857 2SC are both two-wire-braid hydraulic hoses, but they are not interchangeable by name alone. The 2SC is a compact hose design, generally selected when a smaller outside diameter or tighter routing is needed; 2SN is the conventional design and may suit installations with more space. For either type, confirm the required bore, working pressure, minimum bend radius, fluid compatibility, temperature range, and fitting compatibility against the specific manufacturer’s data sheet.

Read more

Quick Comparison

Both hose types use a synthetic rubber inner tube and two braided steel-wire reinforcement layers, with a rubber outer cover. Their standards define different hose designs and dimensional requirements, so the principal purchasing difference is often packaging and routing rather than the number of reinforcement layers. Pressure capability varies by nominal bore and product specification, so it should be compared size by size.

Comparison point DIN EN 853 2SN DIN EN 857 2SC
Reinforcement Two steel-wire braid layers Two steel-wire braid layers
Design emphasis Conventional two-braid hose construction Compact construction for space-conscious routing
Routing considerations Check its specified outside diameter and bend radius Often chosen for tighter routing; verify the specific bend radius
Pressure selection Depends on hose size and supplier specification Depends on hose size and supplier specification

What the Standards and Hose Types Mean

DIN EN 853 2SN

EN 853 2SN identifies a hydraulic hose design with two braided steel-wire reinforcement layers. The inner tube is selected for compatibility with the intended hydraulic fluid, while the outer cover protects the reinforcement and tube from the surrounding environment. Buyers commonly evaluate 2SN for hydraulic circuits where its specified dimensions and bend radius can be accommodated.

The designation does not, by itself, provide every purchasing detail. A buyer still needs to identify the nominal bore, pressure rating, hose length, fluid, temperature, and connection requirements. Product dimensions and performance limits should be taken from the supplier’s technical data for the exact size being ordered.

DIN EN 857 2SC

EN 857 2SC is also a two-wire-braid hydraulic hose, designed in a more compact format. In many product ranges, the reduced outside diameter and bend-radius characteristics make it useful where equipment layout leaves limited clearance. The actual advantage depends on the size and specification being compared, so request dimensional data rather than relying on the “compact” designation alone.

Compact construction does not automatically mean higher pressure, longer service life, or suitability for every connection. Those properties depend on the product specification, system conditions, installation, and compatible fittings. Treat 2SC as a routing option to assess, not as a universal upgrade over 2SN.

Specification Differences Buyers Should Check

Pressure and nominal bore

Both hose types are available in multiple nominal bores, and their working-pressure values can change with size. Compare the rated working pressure for the exact bore and hose model, then ensure it meets the system’s operating requirements. Also check the manufacturer’s stated pressure limits and any applicable assembly requirements; do not infer equivalence from the shared two-braid construction.

If you are looking for more details, kindly visit Hengshui Xinchi Hose Manufacturing Co., Ltd..

For a reliable comparison, request a data sheet that lists inside diameter, outside diameter, working pressure, burst pressure where provided, and minimum bend radius. Confirm the measurement units and whether the pressure is stated as a working or test value. If the system experiences pressure surges, assess those conditions with the equipment designer rather than selecting on nominal pressure alone.

Dimensions, bend radius, and temperature

The hose’s outside diameter affects clamps, guards, routing channels, and available space. The minimum bend radius affects whether the hose can turn safely without being forced into a tight curve. Use the exact manufacturer value in millimetres and follow the installation instructions; bending below the stated minimum can compromise the assembly.

Many standard hydraulic hose products specify a temperature range around -40°C to +100°C for compatible hydraulic fluids, but this must be verified for the exact hose and medium. Fluid type, operating temperature, and exposure conditions can change the acceptable limits. Ask the supplier to confirm compatibility when using water-glycol, phosphate-ester, or other non-standard fluids.

Where Each Hose May Be a Better Fit

Consider 2SN when

  • The equipment has enough clearance for the specified outside diameter and bend radius.
  • The required bore and working pressure are available in a 2SN specification that meets the system design.
  • You are replacing an existing 2SN assembly and have confirmed the dimensions, fittings, and operating conditions.

Consider 2SC when

  • Limited space makes a compact hose design worth evaluating.
  • The hose route has tight turns and the product’s specified bend radius fits the installation.
  • The hose’s rated pressure, dimensions, temperature range, and compatible fittings meet the application requirements.

Typical evaluation points include construction machinery, agricultural equipment, industrial hydraulic systems, and mobile machinery. These are broad application categories, not automatic approvals: vibration, abrasion, pressure cycles, heat, and exposure to oil or weather all matter. Match the hose to the operating environment and the assembly design.

Common Selection Mistakes

  • Choosing by designation alone: 2SN and 2SC are different standard types, but the designation does not replace size-specific data.
  • Assuming pressure ratings match: Compare the rated working pressure for the exact bore and supplier model.
  • Ignoring bend radius: A compact hose may help with routing, but it must still be installed within its stated limit.
  • Overlooking fittings: Confirm fitting type, end connections, crimp specifications, and assembly compatibility.
  • Using the wrong fluid or temperature assumptions: Verify compatibility and operating limits for the intended medium.

For replacement purchases, record the existing hose designation, nominal bore, length, fittings, and equipment operating conditions. If the original hose is damaged or its markings are unreadable, have a qualified technician identify the assembly requirements rather than estimating from appearance. A product that fits physically may still be unsuitable for the pressure or fluid.

How to Make the Final Choice

  1. Identify the system’s required bore, working pressure, fluid, and operating temperature.
  2. Measure installation clearance and determine the routing space available.
  3. Compare the supplier’s outside diameter and minimum bend radius for both hose types in the required size.
  4. Confirm fittings, assembly instructions, and environmental requirements.
  5. Request written technical confirmation if a proposed replacement changes the hose type or dimensions.

Summary and Recommendation

DIN EN 853 2SN and DIN EN 857 2SC both use two steel-wire braid layers, but the 2SC’s compact design can make it preferable where space and hose routing are constrained. The 2SN may be a practical choice when its dimensions meet the installation and the system’s requirements. Neither type is the best choice in every application, and working pressure should be verified for the exact size rather than assumed from the standard name.

Before ordering, compare the data sheets for bore, working pressure, outside diameter, minimum bend radius, temperature, fluid compatibility, and fittings. Hengshui Xinchi Hose Manufacturing Co., Ltd. can support B2B buyers with product-specification discussions and quotation requests for hydraulic hose requirements. Send the required hose type, size, operating conditions, quantity, and connection details so we can help assess a suitable option.

Want more information on DIN EN853 2SN vs DIN EN857 2SC Hydraulic Hose? Feel free to contact us.