99mm Tomato Paste Can Bottom Ends: Specifications, Compatibility, and Sourcing Guide
A 99mm tomato paste can bottom end is a metal closure intended for a can body designed to accept an end of that nominal size. The “99mm” designation is a starting point for identification, not proof that an end will fit every 99mm can: body dimensions, double-seam geometry, material, coating, and production conditions also matter. Before ordering, compare the end with the can maker’s specification or an approved sample, then confirm the details with your supplier. At Wanhua, we help B2B buyers organize these requirements for a clearer compatibility review and quotation.
Please visit our website for more information on this topic.
Key Takeaways
- Use 99mm as the nominal size reference; verify the actual drawing, tolerances, and seam dimensions before production.
- Match the end to the can body, seaming equipment, tomato paste filling process, and product-contact requirements.
- Request written confirmation of material, coating, compound, packaging, MOQ, and lead time rather than relying on diameter alone.
- For planning arithmetic, one bottom end is required per can; for example, 10,000 cans require 10,000 bottom ends before any separately calculated allowance.
Who This Guide Is For
This guide is for can manufacturers, tomato paste processors, packaging distributors, and procurement teams sourcing 99mm can bottom ends. It is especially useful when comparing suppliers, replacing an existing component, or preparing a new packaging specification. The information is intended to support a technical discussion, not replace can-line trials or approval by your packaging engineer. Final fit and performance should be validated with the actual can body and production process.
What a 99mm Can Bottom End Does
A bottom end closes the lower opening of a metal can and forms part of the package’s sealed structure. It is joined to the can body through a double seam, where the end curl and body flange are formed together by seaming equipment. The quality of that joint depends on compatible components and correctly controlled machine setup. For tomato paste, the package also needs to suit the product’s processing, storage, and distribution conditions.
Nominal size versus confirmed fit
The 99mm figure identifies the nominal size requested, but it should not be treated as a complete dimensional specification. Suppliers and can makers may use different conventions for describing dimensions, so clarify what the measurement refers to and request a current technical drawing. Check the end profile, curl, countersink or other formed features, and the dimensions relevant to the double seam. Where an existing line is involved, compare the proposed end with the current approved component and seamer setup.
Materials, Coatings, and Specification Details
Can ends may be specified in different metal substrates, including tinplate or tin-free steel, depending on the packaging system and supplier’s offering. The appropriate choice is not determined by the 99mm size alone; it should align with the can body, forming requirements, corrosion considerations, and the customer’s packaging specification. Coating selection also needs review because the end may contact the product or the product environment. Ask the supplier to identify the material and coating options available for the specific end design.
Information to include in a purchase specification
- Dimensions: Nominal diameter of 99mm, drawing number or revision, relevant tolerances in mm, and any required profile details.
- Material: Substrate type, thickness in mm as defined by the approved specification, and any material requirements set by your can maker.
- Product-contact system: Interior coating or lacquer requirements and compatibility information for tomato paste and the intended processing conditions.
- Sealing details: Compound requirements, application or configuration details where applicable, and the can body and seam specification used for validation.
- Order and delivery: Quantity in pieces, packaging format, delivery destination, requested schedule, and applicable inspection or documentation needs.
Do not assume that two ends are interchangeable because both are described as 99mm. A change in material, profile, coating, or compound may affect forming, sealing, or product suitability. If your specification does not define a value, mark it for supplier confirmation rather than inserting an unverified standard. This keeps quotations comparable and reduces the risk of approving a component against incomplete information.
Compatibility: Match the End to the Can and Process
Compatibility is a system-level decision involving the end, can body, seamer, filling operation, and product requirements. A diameter match is necessary but may not be sufficient to achieve a reliable seam. Your can maker or packaging engineer should confirm that the end profile and body flange are suitable for the intended seaming operation. The finished package should be assessed using the buyer’s established quality and process controls.
Link to Wanhua
Practical compatibility checks
- Confirm the can body: Obtain the body drawing, nominal size, flange details, and any existing end specification from the can supplier.
- Review seaming requirements: Share the seamer type or relevant setup information with the technical teams responsible for the packaging line. Confirm whether change parts or setup adjustments may be needed.
- Check product and process conditions: Provide information about the tomato paste, filling method, and any thermal or storage conditions that define the coating and sealing requirements.
- Approve a sample or trial: Agree on how samples will be evaluated, which measurements will be checked, and who is responsible for final approval before routine orders.
For demand planning, one bottom end is used for each can that requires a bottom closure. As a simple example, an order plan for 10,000 cans corresponds to 10,000 bottom ends before accounting for any separately determined production, sampling, or inventory allowance. Confirm that allowance with your own production and purchasing teams. This calculation is a planning example, not a recommendation for a specific reserve quantity.
How to Select a Supplier
A dependable sourcing decision combines technical fit with commercial clarity. Ask potential suppliers to confirm which requirements they can meet and which details still need engineering review. A useful quotation should identify the product basis, specification or drawing reference, quantity, packaging, price basis, delivery terms, and expected lead time. When a requirement is outside the supplier’s confirmed scope, request a clear qualification rather than treating it as accepted.
Supplier evaluation checklist
- Can the supplier quote the 99mm end against your drawing or approved sample?
- Will the supplier state the material, thickness, coating, and compound details relevant to your specification?
- Can the supplier explain its sample approval, inspection, and change-notification process?
- Are MOQ, production lead time, packaging method, and shipping arrangements stated in writing?
- Can the supplier provide the technical documents and product information your internal review requires?
MOQ and lead time can vary with the end design, material availability, order quantity, production schedule, and destination. For that reason, we recommend requesting a project-specific quotation instead of relying on a general estimate. Ask whether the quoted schedule begins after drawing approval, sample approval, deposit, or another defined milestone. Also confirm how repeat orders will be matched to the approved specification.
Common Sourcing Mistakes to Avoid
The most common mistake is ordering by diameter alone without checking the interface to the can body and seaming process. Another is changing a coating or material without confirming product suitability and package requirements. Buyers can also create avoidable delays by sending an outdated drawing or requesting a quotation without quantity, destination, or delivery timing. Keep one controlled specification as the reference for technical approval, purchasing, and repeat orders.
Work with Wanhua on Your 99mm End Requirement
At Wanhua, we support B2B inquiries by reviewing the information provided for a 99mm tomato paste can bottom end and clarifying the details needed for a suitable quotation. To begin, share your drawing or approved sample reference, can body information, material and coating requirements, estimated quantity, destination, and target delivery schedule. We can then discuss the specification, sample evaluation, and commercial details relevant to your project. Final compatibility should be confirmed by the responsible can and packaging teams before mass production.
Conclusion
A 99mm tomato paste can bottom end should be sourced as part of a complete packaging system, not as a diameter-only component. Confirm the drawing, material, coating, compound, double-seam interface, and production requirements before approving an order. Next, send your specification and forecast to Wanhua for a project-specific review of availability, MOQ, lead time, and quotation details. Clear documentation and sample validation provide a practical path from initial sourcing to a production-ready decision.