Choosing the correct TEBIETE OIL SEAL starts with more than matching a nominal diameter. I recommend confirming the shaft diameter, housing bore, seal width, sealing lip material, operating temperature, shaft speed, lubricant, and installation conditions before requesting a quotation. For example, an oil seal may be specified as 35 × 47 × 7 mm, where the three dimensions represent shaft diameter, outside diameter, and width. This guide explains how I organize those requirements so B2B buyers can select a suitable TEBIETE oil seal and provide the information needed for an accurate sourcing review.
Click here to get more.
I prepared this guide for purchasing managers, mechanical engineers, maintenance teams, distributors, and equipment manufacturers who need to source oil seals from a dependable industrial supplier. It is especially useful when an existing seal has worn markings, when a drawing is incomplete, or when a buyer wants to compare materials and specifications before ordering. The purpose is not to replace application testing or engineering approval, but to make the first technical discussion more accurate and efficient.
Buyers can use this information for automotive components, pumps, gearboxes, agricultural machinery, hydraulic equipment, electric motors, industrial transmissions, and general rotating equipment. The final seal selection still depends on the machine design and operating environment. Where the application is unusual, I recommend submitting the full working conditions rather than selecting only by a catalog size.
A conventional radial oil seal is generally described using three primary dimensions: inner diameter, outer diameter, and axial width. The inner diameter corresponds to the shaft, the outer diameter corresponds to the housing bore, and the width describes the axial space occupied by the seal. A designation such as 40 × 62 × 8 mm is therefore a dimensional starting point, not a complete technical specification.
The seal may also include a metal case, a rubber-covered outside diameter, one or more sealing lips, a garter spring, a dust lip, or other design features. These details influence installation, sealing performance, friction, and resistance to contamination. I therefore ask buyers to provide a drawing, sample, equipment model, or clear dimensional record whenever the original part number is uncertain.
| Specification | What It Describes | Buyer Check |
|---|---|---|
| Inner diameter | The shaft-contacting diameter | Measure the shaft in the sealing area and check wear or grooves |
| Outer diameter | The housing-fit diameter | Confirm the bore condition, roundness, and available interference |
| Width | The axial installation dimension | Check the housing depth and any retaining shoulder |
| Profile | The case, lip, spring, and dust-lip arrangement | Match the replacement profile to the original design |
The most suitable material depends on the fluid and temperature rather than on price alone. Nitrile rubber is commonly considered for many mineral-oil applications and general industrial service, while fluoroelastomer is often evaluated when higher temperature resistance or improved chemical resistance is required. Other elastomer options may be appropriate for water-based fluids, low-temperature conditions, or specialized equipment, but the exact recommendation should be confirmed against the fluid supplier and operating data.
TEBIETE OIL SEAL specifications may also differ by metal case construction, rubber-covered case, spring material, lip geometry, and auxiliary dust lip. A single-lip design may be suitable where contamination is limited, while a dust lip can provide an additional barrier in dirtier environments. These choices can affect friction, heat generation, installation force, and service behavior, so I do not recommend changing the profile without checking the machine design.
Temperature should be recorded as the actual seal-area temperature, not only the ambient temperature. As an initial engineering reference, a buyer may state a target range such as -30°C to 120°C, but this does not automatically approve every elastomer or lubricant combination. Shaft speed, pressure, lubrication method, fluid additives, vibration, misalignment, and contamination should also be included because they may change the practical suitability of the same size.
Rotary oil seals are generally selected for controlled sealing conditions rather than unrestricted high-pressure service. If the application includes pressure above a low-pressure sealing environment, I recommend identifying the continuous and intermittent pressure separately and asking for a design review. The shaft surface, hardness, runout, chamfer, and direction of rotation are also important because poor shaft conditions can cause leakage even when the seal dimensions are correct.
Start with the original part number, manufacturer reference, or equipment drawing if available. If those records are unavailable, measure the seal and housing carefully using calibrated tools and inspect the shaft for wear. Record the three basic dimensions in millimeters, such as 45 × 65 × 10 mm, and add a photograph showing the profile and spring arrangement.
For more information, please visit TEBIETE.
Next, provide the lubricant or fluid name, operating temperature, shaft speed, pressure, and contamination level. A statement such as “gear oil, 1,500 rpm, approximately 90°C, outdoor dust exposure” is more useful than “standard industrial use.” If the equipment has frequent starts and stops, long idle periods, or washdown exposure, those conditions should be stated because they can influence material and lip selection.
I then compare the application data with the candidate elastomer, profile, case construction, and spring option. The objective is to achieve compatibility between the seal and the system, not simply to choose the lowest unit price. When the fluid composition is proprietary or uncertain, a sample, safety data sheet, or fluid specification can help reduce material-selection risk.
Before issuing a purchase order, confirm the requested quantity, packaging, marking, inspection documents, delivery destination, and replacement frequency. Buyers should also clarify whether the order is for a standard size, a repeat production item, a private-label program, or a custom drawing. MOQ and lead time can vary according to material, tooling, packaging, and production planning, so I recommend requesting these details together with the technical quotation.
The most common mistake is ordering only by inner diameter while ignoring the housing bore and width. Another frequent error is replacing a fluoroelastomer seal with a lower-cost material without checking temperature or chemical exposure. Buyers may also overlook shaft wear, incorrect installation direction, poor storage conditions, or a dust environment that requires a different lip profile.
It is also risky to assume that two seals with the same three dimensions have identical performance. Their materials, case designs, spring specifications, lip geometry, and allowable operating conditions may differ. For this reason, I recommend comparing the complete specification and not just the size printed on the package.
When buyers contact TEBIETE, I recommend sending the size, application, material preference, quantity, and delivery requirements in one message. Our technical discussion can then focus on whether the requested size is standard, whether an alternative profile should be considered, and what information is still required for confirmation. For repeat orders, drawings, approved samples, inspection requirements, and packaging instructions can help maintain consistency between purchasing cycles.
TEBIETE OIL SEAL can support buyers evaluating standard replacement seals and application-specific sourcing needs. However, the final recommendation should be based on the actual equipment conditions and, where necessary, validation by the buyer’s engineering team. I do not treat a quotation as a substitute for application approval, particularly when the seal operates with unusual fluids, elevated pressure, high speed, or severe contamination.
The correct TEBIETE OIL SEAL is selected by combining accurate dimensions with the right material, profile, operating conditions, and purchasing requirements. A size such as 35 × 47 × 7 mm identifies the basic envelope, but it does not by itself confirm fluid compatibility, temperature suitability, speed capability, or pressure performance. I recommend preparing a technical inquiry with the dimensions, equipment use, fluid, temperature, speed, quantity, and delivery destination.
For a TEBIETE sourcing consultation, send the original seal reference or drawing whenever possible, together with a photograph and the operating data. I can then help organize the specification review, identify missing information, and clarify standard or customized supply requirements. This approach gives B2B buyers a more reliable basis for product selection, quotation comparison, and long-term oil seal procurement.
For more TEBIETE OIL SEALinformation, please contact us. We will provide professional answers.