The CAS Registry Number for zirconium tetrachloride, commonly written as ZrCl4, is 10026-11-6. Buyers can use this number as an initial identity check, but it does not confirm a product’s purity, grade, packaging, or suitability for a particular process. Before placing an order, compare the CAS number with the product name and formula on the supplier’s quotation, Safety Data Sheet (SDS), and lot-specific Certificate of Analysis (COA). For procurement decisions, verify the documentation against the requirements of your application rather than relying on the CAS number alone.
If you are looking for more details, kindly visit our website.
Zirconium tetrachloride is an inorganic zirconium compound with the formula ZrCl4. The formula indicates one zirconium atom and four chlorine atoms per formula unit. Its molar mass is approximately 233.04 g/mol, a value buyers may use to check whether product literature is consistent with the stated chemical identity.
The compound is commonly supplied as a solid and is moisture-sensitive. Contact with water can cause hydrolysis and produce hydrogen chloride among the reaction products; the precise behavior depends on conditions. Buyers should therefore use the supplier’s SDS and handling instructions to assess storage, transport, and workplace precautions. Do not infer that a sealed package is suitable for a specific use without checking its specification and packaging details.
CAS No. 10026-11-6 is a substance identifier that helps distinguish zirconium tetrachloride in purchasing records, technical documents, and regulatory communication. It is useful when comparing supplier listings, but it is not a quality grade or batch identifier. Two products carrying the same CAS number may differ in assay, trace impurities, physical form, packaging, and intended application.
For that reason, treat the CAS number as one element of an identity check. Confirm that the product name, formula, and CAS number agree across the quotation, SDS, COA, and any specification sheet. If a document shows a mismatch, an outdated revision, or no lot reference, ask the supplier to clarify before approving the material.
Begin with the product name, formula, and CAS number. The expected identity is zirconium tetrachloride, ZrCl4, CAS No. 10026-11-6. Check spelling and formatting carefully, especially where a purchasing system separates the formula from the chemical name.
Use molar mass as a secondary consistency check: approximately 233.04 g/mol. A difference in rounding may be normal, but a substantially different value or a different formula requires an explanation. These identity checks can flag clerical errors; they cannot establish purity or confirm the contents of a particular container.
Request a COA for the offered batch and confirm that its lot or batch number matches the quotation or proposed shipment. Review the assay method and reported result, along with any impurity limits that matter to your process. A generic product sheet may describe a typical specification, while a lot-specific COA reports information tied to a particular batch.
Do not assume that a stated assay, impurity threshold, or analytical method applies to every grade. Ask the supplier to identify which values are guaranteed specifications and which are typical or informational. If your process has critical impurity limits, provide those requirements in writing and obtain confirmation that the proposed grade can meet them.
The SDS should identify the substance and provide relevant hazard, handling, storage, and emergency information. Check that the document applies to the product being quoted and is current for the supplier’s documentation system. The product specification or technical data sheet should clarify the offered grade, physical form where relevant, and the parameters the supplier controls.
Compare the documents for consistent product naming and identity information. If the SDS describes a different composition, or the specification does not define the grade you need, request a corrected or more complete document. For regulatory or internal approval, confirm that the documentation meets your organization’s requirements before shipment.
Azeal Materials contains other products and information you need, so please check it out.
Because zirconium tetrachloride is moisture-sensitive, ask how the product is packaged to protect it during storage and transit. Confirm the container type, net quantity, closure or seal information, and any stated storage conditions. These details should be consistent with the SDS and the handling requirements at your receiving site.
Also confirm the shipping name, applicable transport documentation, and export or import paperwork for your route. Requirements can depend on the destination and shipment details, so buyers should not assume that a prior shipment’s paperwork applies to a new order. Ask the supplier to identify the documents they can provide for your destination and purchase terms.
Zirconium tetrachloride is used as a zirconium-containing feedstock in chemical processes and in applications where its reactivity or conversion to other zirconium materials is relevant. The appropriate grade depends on the intended process, required impurity profile, and downstream controls. Buyers should define the application before comparing quotations, since the lowest quoted price may not represent a suitable specification.
When evaluating material options, distinguish between a standard commercial grade and a specification tailored to a particular process. The relevant comparison may include assay, limits for selected impurities, particle or physical-form requirements, and packaging. Not every supplier offers every option, so request written confirmation rather than assuming that a catalog description covers your requirements.
Provide suppliers with the target grade, required quantity, destination, and any critical analytical limits. State whether you need a lot-specific COA, a particular test method, or additional documentation for internal qualification. Clear requirements make offers easier to compare and reduce the risk of treating different specifications as equivalent.
Check that the supplier can confirm the requested quantity and proposed delivery schedule for the specific grade. Ask whether the quoted lead time is an estimate or a confirmed schedule, and whether the offered packaging matches your receiving and storage arrangements. For repeat purchasing, discuss how specification changes or batch-documentation questions will be handled before the first order.
Assess whether the supplier responds clearly to technical and documentation questions. A reliable sourcing discussion should establish product identity, grade, batch documentation, packaging, and shipment scope before order confirmation. If a supplier cannot explain a discrepancy between the quote, SDS, and COA, request clarification before proceeding.
Azeal Materials supports B2B inquiries for zirconium tetrachloride by helping buyers clarify product requirements and review the documentation available for the proposed material. Availability, grade options, packaging, and lead time should be confirmed for each inquiry. Share your target specification and destination so the offer can be matched to your purchasing needs.
The ZrCl4 CAS No. is 10026-11-6, and the corresponding formula is ZrCl4. Use these details, together with the approximate molar mass of 233.04 g/mol, to check basic identity consistency. Then verify the grade and the offered lot through the COA, SDS, product specification, packaging details, and shipment documents.
The next step is to send your supplier the required grade, quantity, application-related limits, destination, and documentation needs. Ask for written confirmation that the quoted product and lot meet those requirements before issuing a purchase order. Contact Azeal Materials with your zirconium tetrachloride inquiry to discuss available specifications, documentation, packaging, and supply arrangements.
If you are looking for more details, kindly visit Zrcl4 Cas No.