To verify whether a 10112780 Starter Assy fits your vehicle or equipment, do not rely on the part number alone. Match the number against the machine’s make, model, engine, production details, and starter specifications, then compare the mounting and electrical connections with the unit being replaced. Because application coverage cannot be confirmed from the number by itself, share the full equipment details and clear photos with your supplier before ordering. At Shinuo, we can review the information you provide and help confirm whether the offered starter assembly matches your requirements.
If you are looking for more details, kindly visit our website.
This guide is for distributors, repair businesses, fleet and equipment operators, and purchasing teams sourcing a 10112780 Starter Assy. It is especially useful when the existing starter label is worn, the machine has been modified, or a catalog lists several possible replacement numbers. The checks below help reduce avoidable ordering errors, but final fitment should be confirmed against reliable application records or supplier documentation.
If you are purchasing for resale or a maintenance program, collect the same identification details for every unit in the order. A consistent record makes it easier to compare quotations, verify replacement parts, and investigate a mismatch if one occurs. It also helps suppliers distinguish an exact match from a proposed alternative.
The number 10112780 is the identifier supplied for this Starter Assy, but a number alone does not establish the vehicle or equipment application, voltage, rotation, mounting pattern, or electrical-terminal arrangement. Number formats can also vary between manufacturers and catalogs, so avoid assuming that a visually similar or partially matching number is interchangeable. Ask the supplier to confirm the number against the application information and any available reference records.
A starter assembly is generally selected to suit an engine’s mechanical installation and electrical system. Its mounting interface, drive engagement, terminal layout, and operating requirements must be compatible with the specific application. Confirm each of these points rather than relying on appearance or a broad product category such as “starter.”
For a useful application check, record the equipment manufacturer, model, engine make and model, engine serial number, and production year or serial range where available. Also note the voltage shown on the machine or its electrical documentation; starter systems may use 12 V or 24 V, and these values are not interchangeable assumptions. If the old starter has a label, record every legible number exactly as printed, including prefixes, suffixes, and spacing.
Start with the equipment identification plate and engine identification plate rather than a registration description or informal machine name. Record the complete model designation and serial number, since production changes can affect replacement-part selection within a model family. If the equipment has a replacement engine or a modified electrical system, tell the supplier; the original machine data may not describe the current configuration.
Photograph the starter label and the installed unit before removal, if safe and practical. Take clear images from at least 3 angles that show the mounting face, electrical terminals, and overall housing, and add close-ups of any stamped or printed markings. Disconnecting or inspecting electrical parts should follow the equipment manufacturer’s safety instructions; do not work on an energized system.
Compare the replacement candidate with the old unit using the application record and supplier information. Check the mounting-hole arrangement, housing shape, drive-end configuration, connector and terminal positions, and cable clearances. Where a dimension is needed, measure it in millimetres (mm) and state precisely which points were measured; a measurement is useful only when both parties are comparing the same reference points.
Confirm the system’s nominal voltage in volts (V) from an equipment label or reliable electrical documentation. Do not infer voltage from the starter’s appearance or from another machine with a similar model name. Ask the supplier to confirm other application-dependent details, such as rotation or drive configuration, using the relevant part documentation rather than an assumption.
For more information, please visit Shinuo.
Send the supplier the number 10112780, equipment and engine details, available serial information, and photos or measurements. Ask whether the quoted assembly is an exact number match, a documented replacement, or a proposed alternative. Request confirmation of any differences and keep the response with the purchase record.
Use a simple match-or-hold process before placing an order. First, verify the application and part-number reference; next, confirm the mechanical interface and electrical requirements; then review the commercial terms. If one of these checks is incomplete, pause and request clarification instead of treating an approximate match as confirmed fitment.
| Verification area | Information to provide | What to confirm |
|---|---|---|
| Application | Equipment and engine make, model, serial details | Coverage for the specific configuration |
| Part identification | 10112780 and all markings on the old unit | Exact match or documented replacement status |
| Fitment | Photos and relevant measurements in mm | Mounting, clearance, and connection compatibility |
| Electrical system | Documented nominal voltage in V and terminal photos | Compatibility with the equipment’s electrical requirements |
| Order planning | Required quantity in units and requested delivery location | MOQ, price basis, packaging, and estimated lead time |
Price and availability can depend on the confirmed specification, order quantity, packaging requirements, and delivery destination. Ask for a quotation that identifies the quoted part number and describes whether the item is an exact match or an alternative. If the fitment is still under review, make that status clear before approving the order.
Request the minimum order quantity (MOQ), the quoted quantity in units, the estimated lead time in business days, and the quotation validity period. These are order-specific commercial details, not fixed properties of the part number, so obtain them in writing for your requested quantity and shipping terms. If you need a sample or have a time-critical repair, state that when requesting the quotation so the supplier can advise what options are available.
Clear answers are more useful than a broad assurance that a starter “should fit.” If a supplier cannot verify the application from the information provided, ask what additional data is needed. This gives both sides a practical way to resolve uncertainty before payment and shipment.
One common mistake is ordering solely by a number found in an online listing without checking the equipment serial range. Another is comparing only the housing shape while overlooking terminal position, mounting details, or the electrical system. A third is treating a cross-reference as proof of interchangeability without confirming the specific application.
Incomplete photos can also delay a fitment review. Include the label, mounting face, and terminal area, and identify any measurements with units and reference points. If the original unit is unavailable, provide the machine and engine identification data and ask the supplier whether those details are sufficient for a responsible match.
Shinuo supplies automotive electrical and drive-system parts and can review a 10112780 Starter Assy inquiry using the information available for your application. To make the review more efficient, send the part number, equipment and engine details, voltage documentation, requested quantity, destination, and clear photos of the existing unit when available. We can then clarify the information needed to assess fitment and provide applicable quotation details.
The 10112780 number is a starting point, not a complete fitment confirmation. Verify the equipment and engine application, compare mechanical and electrical details, and obtain written confirmation of whether the offered starter is an exact match or a documented alternative. If key information is missing, hold the order until the supplier explains what can be confirmed and what remains uncertain.
For your next step, prepare the machine and engine identification details, record the system voltage in V, and send photos or relevant measurements in mm with your inquiry to Shinuo. Include your required quantity in units and destination so we can discuss fitment review and commercial terms together. This process gives your purchasing team a clearer basis for deciding whether to proceed with the 10112780 Starter Assy.
For more information, please visit 10112780 Starter Assy.